What are the troubleshooting steps for the Contactless and Chip Card Reader?

[Kassi_]

Hey there @Jittersduncan - 

I moved your post over to a board with similar questions. 

Here is a article on troubleshooting steps to help your Contactless + Chip Reader.

Also, you can check out the Best Answer on this post for troubleshooting tips.

[Gav]

For the past few months my contactless chip reader won't process payment. It connects to my Note5, but when I press the charge amount and the reader green light goes on, it won't accept the payment. I leave the chip card in the reader for a while then a red light goes on and the phone says need to re-connect the reader. But the app says the reader is connected when I go back to the register screen. I'm thinking something is wrong with the reader but nowhere does it show there is an error. Very frustrating! 

[storieland]

my iPhone is updated, reader is charged, Square software is updated.

Square reader is connected via bluetooth on iPhone but not recognized as connected when attempting to process payment in the app.  

Help please.

[Kassi_]

Hey there @storieland - 

Welcome to the Seller Community and thank you for your post! I have merged this over to a board under a similar topic and it contains a Best Answer post for troubleshooting your hardware. 

Check out this article to help troubleshoot your Contactless + Chip Reader.

Let me know if those didn't help at all and I can take another look!

[Jittersduncan]

My contactless chip reader is pairing with my square stand but when I press charge it doesn’t light up or work with a card

[Kassi_]

Hey there @Jittersduncan - 

I moved your post over to a board with similar questions. 

Here is a article on troubleshooting steps to help your Contactless + Chip Reader.

Also, you can check out the Best Answer on this post for troubleshooting tips.

[Deer735]

Have issues with using wireless reader. Get message: Restore to Internet to take payments. Have reset both the phone and the reader and software is updated. 

[Kassi_]

Hey there @Deer735 - 

I have moved your post to a board for some troubleshooting steps for your Contactless + Chip Reader. 

[AdamBeckstead]

Reader will not connect to phone after charging

[JustinC]

Hey @AdamBeckstead 

Try performing a hard reset on your reader. Steps are included in this thread's best answer! 

[Uie]

My card reader was working perfectly fine yesterday on a large amount, today it is not working at all it is not connecting to my iPhone.

I have done all the recommended restarting and it is fully charged it’s still not connecting it’s not even showing up as the reader

[RoostersMarkets]

Here it is a busy day and my contactless reader absolutely will not connect. Suggestions????

[Joe]

Hi there, @RoostersMarkets - thanks for reaching out and letting us know. So sorry for the trouble you are experiencing with your Contactless reader! 

I've merged your post into an existing thread of Sellers who were also experiencing similar issues with their Chip Card Readers. Take a look at this Best Answer - it will give you some extensive troubleshooting to walk through. If you walk through these steps and are still experiencing issues, please let me know!

[Kirschygumi]

I have paired my iPhone 8 with my reader. Both phone and square app are current. In settings on App it shows my chip reader but the yellow bar say “connecting” but it never connects. I am trying to run a tutorial of a payment and the reader won’t process because it’s not connected. Anyone who can help?

[ashc]

Hi @Kirschygumi and welcome to the Community.

I moved your post to an existing thread that lists our troubleshooting steps as well as a link to our Support Center article that goes over it.

iPhone 8 is definitely compatible so it should be working once you can troubleshoot it.

[Kirschygumi]

Thanks, Prior to my posting I did go to support and found this thread and did all the suggested fixes multiple times and nothing worked which is why I posted.  I didn’t think my specific problem was really addressed, (reader paired, everything updated, but app won’t connect, says “unavailable “ or just stays in “connecting” mode forever)and most of replies were simply the same link to the same fixes. However, weirdly, very weirdly after I posted my problem, I went back to the app and opened it and within seconds the app connected to the reader (after a day and a half of not doing so). I am new to this but not tech adverse, a little frightened now to use this first time with customer. (I did the tutorial, charged, did refund, it worked, but still not a confidence builder at the get go)

[ITLCoffee]

So my reader was just replaced in August (the last one wasn't even 4 months old) when after a few weeks we were back to the same issues.  Chip reading works sporadically half the time it kicks off and then completely disconnects and goes off line. We push on it to get it to reconnect.   Right now when it's connected we only allow people to tap or Apple Pay.  The insert function like I said, only shuts off and disconnects or it says insert chip (while the chip is inserted).  Oh and it's new thing not charging while on dock.  We have the whole shiny register system with reader and dock.   Restarting it, repairing it, only works for a few hours.   Is anyone else having issues?  I feel like this is a firm ware issue that it won't matter how many they send us they all will do this. 

[Joe]

Hi @ITLCoffee - thanks for reaching out and letting us know about the continued issues with your hardware. Strange, indeed. Have you flagged this over to our Support Team directly? If not, we would recommend reaching out to them as soon as possible.

[Prettyshadyaest]

square keeps disconnecting from my samsung galaxy s10e phone, and is a pain to reconnect, any help?? 

[nika]

Sorry that's happening @Prettyshadyaest! Take a look here for troubleshooting steps that should get you back up and running smoothly again.

[swjax]

My contactless reader keeps disconnecting and reconnecting all day, it does this with two different readers. At this time I use my cell to use square. My wife's phone has no issues with either reader. Please help

[ashc]

Hi @swjax,

I moved your post to an existing thread that links our Support Center article on how to troubleshoot your Contactless + Chip reader.

I would also check to make sure the devices you're using with it are compatible. 

[Blynnw]

My chip reader will not connect.  

The green lights indicate the battery is fully charged.  I have uninstalled the app, reinstalled the app and tried to reset all of the settings.  It just blinks orange or nothing.  There is only one button to push to connect the reader.  This use to connect right away but over time I have notice it will not connect or takes 3 or so mins.  My clients, schedule and life can not keep trying to wait for this thing.  I purchased this for quick secure transactions.  Now I am left manually entering their card each time which is a larger fee and not the point.  I have had this reader since it came out and my phone is a Note10+