@Justinj ;
From Squares Hardware page I do not see a Hub for the Square Stands with a Network port. There is one for the terminal and the register but not for the stands. Are you sure this will work for a Square Stand?
Try this to test your USB Network Adapter. Log out of Square and see if the Ipad can get on your Network through the USB Network adapter. Just because you have a USB adapter to a Square Stand does not mean it will work. I have USB scanners some work with the Ipad through the USB and some do not. Then I have some that work with the Ipad but do not work with The Square Software. I am not sure if there is a USB to Network adapter that works with Square Stands. If I were you I would spend a few more dollars and get a Wired to WIFI repeater Access Point closer to your Stands. That is what I did. I already had a 10/100 cable from the office to my front counter. I connected a Netgear EAX20 wireless /wired repeater. Best Buy and Staples have these for $130. There are cheaper repeaters you can get than this or even turn an old router into an access point or repeater if you have one laying around. My stands do not drop at all. You already have the 10/100 wire there that you are attempting to plug into your Stand, plug it to the Repeater then you can also plug in a Network receipt printer right there also to share between Stands if you want. That is how my front register is setup, One stand for Cash and Credit Cards, and one for Credit Card only. Both print from same receipt printer which can open the cash drawer. But when we do cash from both it messes us up because both stands are pulling from one Cash Drawer. That is why we have the one that is to only be used for Credit Cards. Then you also have a stronger Wifi by the Stands for you checking other things if needed
Keith
Owner
Pocono Candle
Mark as Best Answer if this Helped you solve an issue or give it a thumbs up if you like the answer.
Square Support Number 855-700-6000.
Make Sure App and OS is up to date on your Device.
