thread Re: Stand mount Adhesive not sticking well in Archived Discussions (Read Only)

Stand mount Adhesive not sticking well

cmonster42 — Fri, 21 Jul 2017 20:00:32 GMT

I just got a new register drawer (This one) and just attached the adhesive to the bottom of our stand.It's not sticking very well though. On each spin, the stand slips a little on the surface. Any advise on a better sticking system?

Thanks!

Re: Stand mount Adhesive not sticking well

Lima — Wed, 11 Jan 2017 00:15:57 GMT

When I do install on metal mount I use http://amzn.to/2j5vczB
(Stick it to do existing tape, press for couple hours.)

I prefer drilling the drawer box (bigger hole on bottom and smaller on top, bigger for screwdriver to pass)
and securing It with screw. ( I get screw from homedepot and cut it so it clears drawer)

Re: Stand mount Adhesive not sticking well

VanKalkerFarms — Wed, 11 Jan 2017 03:19:54 GMT

I don't know what to tell you but one of our setups is exactly this, with the sticky adhesive from the square stand directly to the vesario cash drawer and you can pick up the stand and the drawer will come off the counter. all the rest are bolted directly to the counter. 3M makes spray cans of adhesive that you could try.

Re: Stand mount Adhesive not sticking well

Sean — Wed, 11 Jan 2017 22:26:58 GMT

@Lima @VanKalkerFarms - Thanks for the tips!

@cmonster42 - You could also reach out directly and request a new sticker. Maybe you just got a bad one.

Re: Stand mount Adhesive not sticking well

cmonster42 — Thu, 12 Jan 2017 20:46:41 GMT

Thanks everyone for the tips. I figured out that the problem is not the adhesive. It was that when I screwed that plate onto my stand, I did it to finger tight, since that was as far as I could go. When I stuck it down, the adhesive was working so well that it didn't need that much tork to unscrew slightly and thus feel like it was going past the stop on the stand. So I just turned the whole stand so it tightened down on the plate itself and got it real tight, thanks to the strength of the adhesive. It's now fine.

Re: Remove Square Stand (adhesive)

pelicanspoq — Sun, 25 Feb 2018 05:26:27 GMT

We need replacement adhesive for our stand as we are moving it. How do we get that?

Re: Remove Square Stand (adhesive)

katieand — Tue, 27 Feb 2018 20:06:05 GMT

Hi @pelicanspoq - Check out @Sean's best answer from above! You can give our team a call to get a new sticker!

Re: Stand mount Adhesive not sticking well

greenecanteen — Fri, 16 Aug 2019 14:39:06 GMT

Hi, we need a new adhesive disk for our square stand and I can't seem to track one down. Does anyone have any suggestions? I called Square and they said they don't stock them anymore. 😞

Re: Stand mount Adhesive not sticking well

ashc — Sat, 17 Aug 2019 14:49:52 GMT

Hey @greenecanteen! Welcome to the Community!

We should still have replacement adhesive mounts that we can provide for free.

Can you send me a DM so I can get some shipping information from you and I can get someone on our Customer Success team to send one out if it is available?

Re: Stand mount Adhesive not sticking well

greenecanteen — Tue, 03 Sep 2019 20:05:52 GMT

@ashc Thank you! My shipping address is [personal information redacted]

Thanks!

-The Greene Canteen

Re: Stand mount Adhesive not sticking well

ashc — Tue, 03 Sep 2019 20:07:44 GMT

No problem @greenecanteen!

I'm placing the order now and I also redacted your personal information from your post since this is a public forum for your privacy purposes.

You should be receiving a confirmation email for the order shortly! 🙂

Re: Stand mount Adhesive not sticking well

greenecanteen — Tue, 03 Sep 2019 20:14:16 GMT

Thanks! I tried to DM you but the site kept giving me an error.

Re: Stand mount Adhesive not sticking well

ashc — Tue, 03 Sep 2019 20:17:07 GMT

@greenecanteen No worries! I placed the order as well so you should be seeing the confirmation email now.

Re: Stand mount Adhesive not sticking well

Lev2sthyacinthe — Wed, 28 Jul 2021 21:27:55 GMT

Hi I’m in the same situation I need a new adhesive mount! Could you let me know how to proceed. Thanks!

Re: Stand mount Adhesive not sticking well

Arie — Thu, 29 Jul 2021 01:07:59 GMT

Hey @Lev2sthyacinthe,

Thanks for writing in & welcome to our community 🙂 👋

You can reach out directly to our team and request a new sticker.